Canon-imageRUNNER-2230 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you are looking at this blog post and have experience with this error and desire to contribute please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will answer back.
Always remember, not every error is completely the same. What remedies the trouble one occasion will possibly not solve it the next occasion. While the information in this blog is obtained from the service manual and most often ought to get your device working, on occasion other elements could possibly be in play.
