Canon-imageRUNNER-2230 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-2230 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you are looking at this blog post and have knowledge of this problem and want to share you should leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have exposure to the trouble then I will reply.
Always remember, not every error is exactly alike. What corrects the complication one occasion may not fix it the next occasion. While the help and advice in this document comes from the service manual and usually should get your product ready to go, on occasion additional circumstances could possibly be in play.
