Canon-imageRUNNER-2230 E191 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E191 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E191 0000 Error Code
E191 0000
Description :
There is an error in the communication with the high-voltage power supply.
Causes :
The data transmission/reception does not end normally 500 msec after the most recent transmission/reception of data ended normally.
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are looking at this blog post and have information about this fault and would like to contribute be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will reply.
Always remember, not every error is entirely identical. What corrects the malfunction one time may possibly not take care of it the next time. While the tips in this post derives from the service manual and oftentimes should get your machine working, from time to time other causes might be in play.
