Canon-imageRUNNER-2230 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are looking at this article and have exposure to this fault and desire to share be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will answer.
Always remember, not every error is absolutely the same. What remedies the complication one occasion might not remedy it the next occasion. While the content in this piece of content is taken from the service manual and generally ought to get your product operational, occasionally other variables may be in play.
