Canon-imageRUNNER-2230 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E001 0001 Error Code
E001 0001
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2230 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2230 E000, E001, E002, E003, Error Code Reset
If you are looking at this article and have experience with this malfunction and would like to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.
Always remember, not every error is absolutely alike. What remedies the issue one occasion will possibly not resolve it the next time. While the tips in this page is taken from the service manual and oftentimes should get your machine working, from time to time other variables could possibly be in play.
