Canon imageCLASS D1180 E808 0 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1180 E808 0 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1180 E808 0 Error Code
E808 0
Description :
E808 0 Fixing drive circuit failure
Causes :
The heater does not turn on.
Solutions :
A fixing drive motor failure was detected.
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the fixing drive motor.
Replace the Engine controller PCB.
Remember that, not every error is absolutely identical. What treats the problem one time may not remedy it the next time. While the help and advice in this written piece hails from the service manual and usually should get your piece of equipment ready to go, now and again other factors can be in play.
If you are reading this piece of content and have exposure to this error and wish to share you should leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will reply.
