Lanier LD122SP Laser Motor Replacment recommendations
Below you’re going to acquire the Lanier LD122SP Laser motor replacement tips. The SC 320 Error is the common underlying cause to might have to repair or remove this part. Sounds can certainly be one other issue. As time passes, the lubrication will wear lessen and you’re likely to get a loud reverberation using these devices and they get into action to printing rate. Ordinarily, my step one requires you to clean up the element, go ahead and take the motor apart, clean up and lubricate the motor bushings and polygon motor shaft, and test if that performs.
Lanier LD122SP Laser Motor Replacement Procedure
?WARNING
Turn off the main power switch and unplug the machine before attempting this technique. Laser beam can significantly harm your eyes.
1. Pull out the optional finisher/bridge unit, and either the tray for the optional 1-bin tray unit or optional shift tray, if these units have been installed.
2. Pull off the upper front cover [A] (1 screw, 1 hook).
3. Clear away the front cover [B] (2 pins).
4. Pull out the inner cover [C] (5 screws).
5. Remove the copy tray [D] (1 hook [E]).
6. Strip off the toner bottle holder [F].
Note : If your just replacing or want to remove the motor you most likely aren’t required to remove the whole system. If you ask me, I never have. Plus, it may well contribute to requiring you to do Step 8.
7. Remove the laser unit [G] (2 screws, 2 connectors).
8. After reassembling the equipment, complete the scanner and printer copy adjustments.
Bear in mind : I’m not likely going to put this in here because I am not completely positive that it’s necessary for this repair. I recognize, I for no reason have had to do it. Besides, most people who happen to be still using these machines usually are not highly alarmed if print quality may be diminished on the whole.
