Canon imageRUNNER 2545I E413 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E413 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E413 0000 Error Code
E413 0000
Description :
Causes :
The sensing level of the release motor HP sensor (SR11) does not change within a specified period when the release motor (M2) is driven.
Solutions :
1.Replace the Release Motor HP Sensor (SR11).
2.Replace the Release Motor (M2).
3.Replace the ADF Driver PCB.
Note, not every error is precisely identical. What fixes the situation one occasion might not exactly eliminate it the next occasion. While the specifics in this article is taken from the service manual and most often should get your device functioning, at times other elements might be in play.
If you’re looking at this article and have exposure to this error message and would like to make a contribution you should leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the problem then I will answer back.
