Canon imageRUNNER 1750iF E577 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E577 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1750iF E577 8001 Error Code
E577 8001
Description :
Paddle Motor (M3) error
Causes :
Although the Paddle Motor (M3) was driven for 175 steps, the Paddle failed to move from the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Make sure you remember, not every error is precisely the same. What fixes the difficulty one occasion may possibly not take care of it the next time. While the content in this written piece hails from the service manual and usually ought to get your unit functioning, at times other variables could possibly be in play.
If you are reading this post and have experience with this error message and would like to contribute please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will answer back.