Canon-imageRUNNER-3025N E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 3025N Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3025N E000, E001, E002, E003, Error Code Reset
If you are reading this short article and have exposure to this error message and desire to make a contribution please leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the problem then I will respond.
Note, not every error is absolutely the same. What fixes the difficulty one occasion may not get rid of it the next time. While the tips in this writing is taken from the service manual and in most cases should get your machine working, at times other causes may be in play.
