Kyocera FS2020D, FS3920DN, FS4020DN Service Call 1140 Instructions
Below you will find the service manual information for the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 1140 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 1140
1140 Lift motor ascent error
Description :
*40/42 and 45/47 ppm printers (EUR/USA model) only Optional bulk paper feeders tray top position sensor does not turn on.
Lift motor lock error occurred 3 times.
Causes :
Defective bulk paper feeders tray top position sensor.
Defective harness between bulk paper feeders tray top position sensor and main PWB (YC6), or improper connector insertion.
Defective bulk paper feeders main PWB.
Solutions :
Replace the bulk paper feeders tray top position sensor.
Reinsert the connector.
Also check for continuity within the connector harness.
If none, remedy or replace the harness.
Replace the bulk paper feeders main PWB.
Refer to bulk paper feeders service manual)
Remember, not every error is exactly the same. What fixes the Kyocera FS2020D, FS3920DN, FS4020DN Service Call 1140 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.