Canon-imageRUNNER-2230 E032 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E032 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-2230 E032 0001 Error Code
E032 0001
Description :
The NE controller counter malfunctions.
Causes :
An open circuit is detected for the count pulse signal.
Solutions :
Turn off the main power, and check the cable for an open circuit; then, turn the main power back on.
If you are looking at this article and have knowledge about this malfunction and want to share please leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the trouble then I will answer back.
Always remember, not every error is completely the same. What corrects the condition one occasion will possibly not eliminate it the next time. While the specifics in this piece of content is taken from the service manual and usually ought to get your piece of equipment ready to go, now and again additional factors can be in play.