Canon imageRUNNER 2545I E804 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E804 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E804 0000 Error Code
E804 0000
Description :
Causes :
When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped.
* The same condition is detected after the error retry is performed.
Solutions :
1.Disconnect and then connect the connector (J205) on the DC Controller PCB (PCB4).
2.Replace the Power Supply Cooloing Fan (FAN6).
3.Replace the DC Controller PCB (PCB4).
Note, not every error is completely identical. What fixes the issue one time may not take care of it the next occasion. While the data in this text hails from the service manual and typically ought to get your machine functioning, on occasion other things might be in play.
If you are reading this short article and have knowledge about this error and would like to contribute make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will answer.
