Canon imageRUNNER 2545 E531 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E531 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E531 8001 Error Code
E531 8001
Description :
Causes :
The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.
Solutions :
1.Check the wiring between the Finisher Controller PCB and Stapler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is exactly the same. What treats the complication one occasion might not fix it the next time. While the tips in this piece of content derives from the service manual and generally ought to get your equipment ready to go, sometimes other things might be in play.
If you’re looking at this page and have information about this fault and desire to contribute make sure you leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will reply.
