Canon imageRUNNER 2545 E520 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E520 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E520 0002 Error Code
E520 0002
Description :
Causes :
The shift roller does not return to the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.
Solutions :
1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is exactly the same. What treats the trouble one time might not exactly get rid of it the next time. While the help and advice in this post is inspired by the service manual and usually ought to get your piece of equipment operating, sometimes other factors might be in play.
If you’re looking at this page and have information about this fault and would like to share be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will reply.
