Canon imageRUNNER 2535I E805 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E805 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E805 0003 Error Code
E805 0003
Description :
Causes :
When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven
* The same condition is detected after the error retry is performed.
Solutions :
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Front) (FAN4).
3.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely the same. What fixes the complication one occasion may not resolve it the next time. While the ideas in this piece of content originates from the service manual and oftentimes should get your device working, from time to time additional circumstances can be in play.
If you’re looking at this post and have knowledge about this error message and would wish to share be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will respond.
