Canon imageRUNNER 2535I E413 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E413 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E413 0000 Error Code
E413 0000
Description :
Causes :
The sensing level of the release motor HP sensor (SR11) does not change within a specified period when the release motor (M2) is driven.
Solutions :
1.Replace the Release Motor HP Sensor (SR11).
2.Replace the Release Motor (M2).
3.Replace the ADF Driver PCB.
Realize, not every error is simply alike. What remedies the situation one time may not remedy it the next occasion. While the specifics in this posting comes from the service manual and typically ought to get your device working, on occasion other elements might be in play.
If you’re looking at this write-up and have exposure to this malfunction and would like to make a contribution please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the situation then I will reply.
