Canon imageRUNNER 2535I E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E010 0001 Error Code
E010 0001
Description :
Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Solutions :
1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).
Remember that, not every error is absolutely the same. What treats the condition one occasion may possibly not remedy it the next occasion. While the information in this write-up derives from the service manual and normally should get your machine operating, occasionally other causes can be in play.
If you’re looking over this article and have knowledge of this malfunction and would wish to contribute please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will respond.
