Canon imageRUNNER 2025i E003 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2025i E003 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2025i E003 0001 Error Code
E003 0001
Description :
Abnormally low temperature (detected by sub thermistor)
Causes :
After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2025i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Try to remember, not every error is absolutely alike. What treats the malfunction one time might not eliminate it the next time. While the guidance in this blog post is obtained from the service manual and most often ought to get your equipment up and running, at times other elements can be in play.
If you are looking over this write-up and have expertise in this malfunction and would wish to share please leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will answer.
