Canon imageRUNNER 2022i E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2022i E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2022i E003 0000 Error Code
E003 0000
Description :
Abnormally low temperature (detected by main thermistor)
Causes :
After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2022i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Try to remember, not every error is exactly alike. What fixes the difficulty one occasion may not eliminate it the next occasion. While the help and advice in this text obtain from the service manual and usually ought to get your device operating, now and again additional variables may be in play.
If you are looking over this post and have knowledge of this fault and would like to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will reply.
