Canon imageRUNNER 2022 E808 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2022 E808 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2022 E808 0000 Error Code
E808 0000
Description :
Fixing drive circuit failure
Causes :
The heater does not turn on.
Solutions :
A fixing drive motor failure was detected.
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the fixing drive motor.
Replace the DC controller PCB.
Replace the power supply PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2022 Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Try to remember, not every error is exactly the same. What corrects the situation one time might not exactly eliminate it the next occasion. While the information in this blog is taken from the service manual and normally ought to get your piece of equipment up and running, from time to time other elements can be in play.
If you are looking over this post and have knowledge about this problem and wish to contribute you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will respond.
