Canon imageRUNNER 2018i E808 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2018i E808 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2018i E808 0000 Error Code
E808 0000
Description :
Fixing drive circuit failure
Causes :
The heater does not turn on.
Solutions :
A fixing drive motor failure was detected.
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the fixing drive motor.
Replace the DC controller PCB.
Replace the power supply PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2018i Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Understand, not every error is absolutely identical. What corrects the difficulty one occasion may not solve it the next time. While the help and advice in this blog is taken from the service manual and generally ought to get your piece of equipment functioning, on occasion additional circumstances can be in play.
If you are looking over this piece of content and have expertise in this problem and would like to share make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will answer back.
