Canon imageRUNNER 2018i E719 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2018i E719 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2018i E719 0002 Error Code
E719 0002
Description :
Erroneous communication with coin vendor (serial communication)
Causes :
Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on).
A serial communication error has occurred. (The serial communication error cannot be recovered.)
Solutions :
Check the connection between the image processor PCB and serial PCB.
Check the connectors of the serial PCB and coin vendor for normal connection.
Replace the serial PCB.
Check the coin vendor.
Replace the image processor PCB.
Understand, not every error is completely identical. What remedies the difficulty one time may not eliminate it the next time. While the help and advice in this posting obtain from the service manual and in most cases ought to get your equipment ready to go, in some cases additional circumstances might be in play.
If you are looking over this page and have knowledge of this malfunction and wish to make a contribution make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will answer.
