Canon imageRUNNER 2018i E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2018i E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2018i E100 0000 Error Code
E100 0000
Description :
BD detection PCB failure
Causes :
The BD detection PCB is faulty.
Solutions :
Check the connector of the BD detection PCB.
Replace the laser scanner unit.
Replace the DC controller PCB.
Understand, not every error is entirely the same. What remedies the complication one occasion might not exactly take care of it the next occasion. While the advice in this piece of content is inspired by the service manual and most likely ought to get your device operational, now and again additional circumstances could possibly be in play.
If you are looking over this page and have exposure to this malfunction and would like to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will answer.
