Canon imageRUNNER 1750 E805 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750 E805 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 1750 E805 0002 Error Code
E805 0002
Description :
Heat Exhaust Fan (Front) (FM5) error
Causes :
A lock signal was detected for 5 seconds while the Heat Exhaust Fan (Front) (FM5) was being stopped.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J212) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).
Keep in mind, not every error is precisely the same. What treats the condition one time might not fix it the next time. While the info in this document originates from the service manual and normally should get your machine ready to go, on occasion other causes may be in play.
If you are reading this document and have expertise in this error and want to share be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will respond.
