Canon imageRUNNER 1750 E575 8004 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750 E575 8004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750 E575 8004 Error Code
E575 8004
Description :
Gripper Motor (M7) clock error
Causes :
When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more.
Solutions :
1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
3. Replace the Gripper Encoder Sensor (S8).
4. Replace the Gripper Motor (M7).
5. Replace the Finisher Controller PCB.
Keep in mind, not every error is entirely identical. What treats the malfunction one occasion may not solve it the next occasion. While the material in this posting is taken from the service manual and most likely ought to get your unit operational, occasionally other things can be in play.
If you are reading this blog post and have information about this error message and would like to contribute please leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will respond.
