Canon imageRUNNER 1740iF E577 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E577 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E577 8001 Error Code
E577 8001
Description :
Paddle Motor (M3) error
Causes :
Although the Paddle Motor (M3) was driven for 175 steps, the Paddle failed to move from the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Just remember, not every error is entirely identical. What corrects the issue one occasion might not exactly take care of it the next occasion. While the advice in this written piece is taken from the service manual and generally ought to get your product operational, on occasion additional variables may be in play.
If you are looking over this post and have knowledge of this problem and would wish to share please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will answer back.
