Canon imageRUNNER 1740iF E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E014 0002 Error Code
E014 0002
Description :
Fixing Motor (M1) rotation error
Causes :
Detection was performed every 100 msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Solutions :
1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203).
2. Replace the Fixing Motor (M1).
3. Replace the DC Controller PCB (PCB1).
Don’t forget, not every error is exactly identical. What treats the problem one time will possibly not take care of it the next time. While the specifics in this blog comes from the service manual and usually should get your equipment operating, occasionally additional variables can be in play.
If you are looking over this piece of content and have expertise in this error and wish to share be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the problem then I will answer.
