Canon imageRUNNER 1740iF E013 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E013 0001 Error Code
E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)
Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.
Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).
Don’t forget, not every error is exactly identical. What remedies the problem one occasion may not fix it the next occasion. While the ideas in this writing obtain from the service manual and typically ought to get your machine ready to go, in some cases other reasons might be in play.
If you are looking over this piece of content and have experience with this fault and would wish to contribute please leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will answer.
