Canon-imageRUNNER-4570 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you’re reading this short article and have knowledge about this error and desire to contribute please be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the issue then I will answer back.
Understand, not every error is exactly the same. What fixes the condition one occasion may possibly not remedy it the next occasion. While the tips in this blog is taken from the service manual and most often should get your unit operating, in some cases other variables can be in play.
