Canon-imageRUNNER-4570 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 4570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 4570 E000, E001, E002, E003, Error Code Reset
If you’re reading this page and have knowledge of this fault and would like to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will answer.
Try to remember, not every error is exactly alike. What treats the complication one occasion might not exactly resolve it the next time. While the tips in this document is taken from the service manual and most likely should get your device working, sometimes additional factors can be in play.
