Canon-imageRUNNER-4570 E002 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-4570 E002 0000 Error Code
E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.
Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 4570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 4570 E000, E001, E002, E003, Error Code Reset
If you’re reading this page and have knowledge about this malfunction and would wish to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have information about the difficulty then I will reply.
Try to remember, not every error is exactly alike. What corrects the malfunction one occasion may not get rid of it the next occasion. While the content in this short article obtain from the service manual and most often ought to get your product ready to go, in some cases additional factors might be in play.
