Canon-imageRUNNER-3570 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you’re reading this short article and have expertise in this malfunction and wish to share please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will respond.
Understand, not every error is exactly alike. What remedies the difficulty one occasion may possibly not remedy it the next time. While the guidance in this write-up derives from the service manual and normally should get your piece of equipment operating, on occasion other causes might be in play.