Canon-imageRUNNER-3570 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re reading this post and have experience with this problem and would like to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will answer back.
Try to remember, not every error is totally the same. What remedies the issue one time might not resolve it the next occasion. While the help and advice in this blog post is taken from the service manual and in most cases ought to get your product functioning, occasionally other reasons may be in play.
