Canon-imageRUNNER-3570 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-3570 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you’re reading this piece of content and have knowledge about this fault and wish to make a contribution please be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have information about the problem then I will reply.
Try to remember, not every error is totally the same. What corrects the complication one time might not exactly remedy it the next occasion. While the tips in this writing hails from the service manual and in most cases ought to get your machine up and running, from time to time additional factors could possibly be in play.
