Canon-imageRUNNER-3570 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E001 0001 Error Code
E001 0001
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3570 E000, E001, E002, E003, Error Code Reset
If you’re reading this piece of content and have expertise in this fault and would wish to contribute please be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will answer back.
Try to remember, not every error is precisely alike. What fixes the condition one occasion will possibly not remedy it the next occasion. While the details in this posting obtain from the service manual and in most cases should get your device ready to go, on occasion other variables can be in play.
