Canon-imageRUNNER-3570 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3570 E000, E001, E002, E003, Error Code Reset
If you’re reading this piece of content and have expertise in this fault and wish to share make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
Try to remember, not every error is exactly the same. What corrects the trouble one time will possibly not fix it the next time. While the material in this page derives from the service manual and oftentimes ought to get your device up and running, in some cases other reasons can be in play.
