Canon-imageRUNNER-3530 E805 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E805 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E805 0000 Error Code
E805 0000
Description :
There is a fan error.
Causes :
While the fan is at rest, the lock signal has been detected for 5 sec.
While the fan is in operation, the lock signal is not detected for 5 sec.
Solutions :
Replace the fan.
Replace the DC controller PCB.
If you’re reading this piece of content and have experience with this problem and wish to share be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will reply.
Try to remember, not every error is exactly identical. What treats the situation one time may possibly not eliminate it the next occasion. While the material in this writing derives from the service manual and most likely ought to get your product up and running, now and again additional circumstances might be in play.
