Canon-imageRUNNER-3530 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you’re reading this page and have experience with this error message and want to share please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will answer back.
Try to remember, not every error is completely alike. What treats the difficulty one occasion may possibly not eliminate it the next occasion. While the details in this piece of content originates from the service manual and normally should get your product ready to go, at times additional factors might be in play.
