Canon-imageRUNNER-3530 E716 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E716 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-3530 E716 0000 Error Code
E716 0000
Description :
There is an error in the communication with the pedestal.
Causes :
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec.
Solutions :
Check the cable. Replace the DC controller PCB.
Replace the pedestal drive PCB.
If you’re reading this document and have knowledge of this error message and wish to contribute you should leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer back.
Try to remember, not every error is absolutely identical. What fixes the difficulty one time may possibly not take care of it the next time. While the advice in this post is inspired by the service manual and in most cases should get your equipment operational, at times other variables can be in play.
