Canon-imageRUNNER-3530 E202 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E202 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E202 0002 Error Code
E202 0002
Description :
There is an error in the detection of the CIS home position.
Causes :
The attempt to detect the home position fails when the CIS is moved back.
Solutions :
Disconnect and then connect the harness connector.
Replace the following as necessary: scanner home position sensor, scanner motor, reader controller PCB.
If you’re reading this blog post and have exposure to this fault and would like to contribute make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have information about the problem then I will respond.
Take into account, not every error is precisely alike. What corrects the problem one time will possibly not resolve it the next time. While the information in this blog post is inspired by the service manual and oftentimes ought to get your unit up and running, from time to time other things might be in play.
