Canon-imageRUNNER-3530 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re reading this article and have knowledge of this malfunction and wish to contribute please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will reply.
Take into account, not every error is exactly identical. What corrects the trouble one time might not solve it the next occasion. While the specifics in this writing is taken from the service manual and usually ought to get your machine up and running, at times other things might be in play.
