Canon-imageRUNNER-3045 E730 A006 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E730 A006 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E730 A006 Error Code
E730 A006
Description :
There is a PDL software error.
Causes :
The PDL board does not respond.
A subbootable is faulty or absent.
Solutions :
1. Execute PDL resetting.
2. Turn on the power once again.
3. Check the connection of the SURF board.
4. Re-install the firmware.
5. Replace the main board.
If you’re looking over this write-up and have experience with this fault and wish to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will reply.
Remember, not every error is totally alike. What fixes the problem one time may possibly not remedy it the next time. While the content in this page obtain from the service manual and oftentimes should get your device up and running, on occasion additional factors may be in play.
