Canon-imageRUNNER-3045 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you’re looking over this short article and have knowledge of this problem and would wish to share please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the problem then I will answer back.
Remember, not every error is totally alike. What fixes the condition one occasion will possibly not solve it the next time. While the data in this writing obtain from the service manual and generally should get your piece of equipment working, on occasion other reasons could possibly be in play.
