Canon-imageRUNNER-3045 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3045 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3045 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you’re looking over this short article and have expertise in this problem and would wish to contribute please leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have exposure to the problem then I will answer back.
Remember, not every error is precisely the same. What remedies the issue one occasion will possibly not remedy it the next time. While the guidance in this document is taken from the service manual and normally ought to get your unit functioning, at times additional variables might be in play.
