Canon-imageRUNNER-3035 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you’re looking over this document and have expertise in this fault and wish to contribute be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will respond.
Remember that, not every error is entirely the same. What fixes the malfunction one occasion might not get rid of it the next time. While the info in this posting is obtained from the service manual and in most cases should get your product up and running, at times additional circumstances may be in play.
