Canon-imageRUNNER-3035 E609 E610 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E609 E610 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E609 E610 Error Code
E609 E610
Description :
The HDD coding key is faulty.
Causes :
The SRM/PCB is faulty.
The battery has become exhausted,leading to loss of SRAM contents.
Solutions :
Try step 1); if it fails, try step 2).
1) Turn off and then back on the power switch to generate the key once again.
2) If the same error still continues, replace the board on which the SRAM is mounted.
(Keep in mind that doing so will lead to loss of all user data.)
If you’re looking over this document and have experience with this malfunction and desire to share make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have experience with the problem then I will respond.
Remember that, not every error is entirely the same. What fixes the issue one occasion may not remedy it the next occasion. While the ideas in this piece of content is inspired by the service manual and in most cases should get your product operating, at times other factors may be in play.
