Canon-imageRUNNER-3035 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you’re looking over this article and have knowledge of this error message and would like to contribute you should leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will answer back.
Remember that, not every error is absolutely the same. What remedies the situation one occasion may not remedy it the next occasion. While the help and advice in this written piece derives from the service manual and typically ought to get your equipment up and running, at times additional circumstances might be in play.
