Canon-imageRUNNER-3030 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E014 0002 Error Code
E014 0002
Description :
The rotation of the fixing motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the fixing motor.
Replace the DC controller PCB.
If you’re looking at this page and have expertise in this error and wish to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will answer.
Please remember, not every error is exactly alike. What corrects the condition one time might not exactly remedy it the next time. While the specifics in this writing is taken from the service manual and oftentimes ought to get your equipment up and running, occasionally other variables may be in play.
