Canon-imageRUNNER-3030 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon-imageRUNNER-3030 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3030 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3030 E000, E001, E002, E003, Error Code Reset
If you’re looking at this document and have knowledge of this error message and want to share be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will respond.
Please remember, not every error is entirely the same. What remedies the complication one time might not eliminate it the next time. While the info in this posting is taken from the service manual and typically should get your equipment ready to go, in some cases other things may be in play.
